Toshiba Tecra A2 User Manual Download Page 57

Page: 57 / 256

Getting Started

Adding memory

5.375 x 8.375 ver 2.3

If the computer is on, begin at step

; otherwise, skip to step

If the computer is on, click

Start

Turn off computer

The Turn off computer window appears.

Click

Turn Off

The operating system turns off the computer.

Unplug and remove any cables connected to the
computer.

Remove the battery. For information on removing the
battery, see

“Changing batteries” on page 122

Close the display panel and turn the computer upside
down to locate the memory module slot cover to the
memory module slot.

Sample locating the memory module slot cover

Using a standard Phillips no. 1 screwdriver, unscrew the
screw that secures the memory module slot cover, then
remove the memory slot cover.

Memory module slot cover

Summary of Contents for Tecra A2

































































































































































































































































Search results

Summary of Contents for Tecra A2

Reviews:

Related manuals for Tecra A2

Brands by name

Popular brands

Toshiba Tecra A2, User Manual

Search results

Summary of Contents for Tecra A2

Reviews:

Related manuals for Tecra A2

Brands by name

Popular brands