Toshiba TDP-MT400, Service Manual

Page: 35 / 118

Toshiba Series
3-16
Key :
Up / Down Choose an item with cursor
Left / Right Adjust a value / Choose a setting
Setup Initialize adjustment values
a.) CW index adjustment
Procedure :
Choose the C/W index delay.
Adjust a value.
Range is from 0 to 719.
Default value is 200.
Test Pattern : RGBW 64 scale.
b.) DMD bias voltage adjustment
Procedure :
Choose the DMD bias voltage.
Adjust a value.
Range is from B to E.
DMD Chip Default value is E.
c.) Save data to EEPROM
Procedure :
Push Up / Down / Left / Right at the same time.
If these key inputs are accepted, all LEDs light orange.
3-4.5 CW index delay menu (includes the DMD bias voltage)
(Press Hot Keys; then, press “”Left” key simultaneously)
C/W index delay x
DMD bias voltage x
White peaking x
Gamma table x
CSC table x
GAM On Off
CSC On Off