46
Chapter 3
How to use the LCD Display Monitor
Schedule confirmation
To confirm the schedule, select ENABLE SCHEDULE in the OSD, then press the MENU button on the infrared
remote control or the MENU button on the left side of the LCD display to exit the SCHEDULE menu of the OSD
screen function. If you turn off the power before exiting the SCHEDULE menu, the schedule settings may be canceled.
• Before making the schedule settings, be sure to check the current date and time using
“DATE AND TIME”.
• When you close the SCHEDULE screen, the settings are saved.
• When two or more schedules are enabled, they are executed according to the setting of
the timer. If the time period overlaps between different schedules, the schedule changes
to the schedule started later, and the power turns off once the last executed schedule has
completed.
• When two or more schedules have the same power-on/off time, the one with the smallest
program number is executed.
• When a schedule has been set, the off timer is disabled.
• You cannot set the power-on time and the power-off time to the same time.
• The power-off time cannot be set if the power-on time has not been set.
• When the AC power supply turns off or the circuit breaker trips due to power failure or
other causes, the schedule programs will be keep and executed when the AC power supply
returns. However, system time will not be correct if the AC power is off for more than 168
hours.
N O T E
TSB.book Page 46 Monday, August 31, 2015 4:30 PM