manualshive.com logo in svg

Toshiba TD-E502, User Manual, Page: 17 / 77

Share
Download
Toshiba TD-E502 User Manual Download Page 17

17

Chapter 1

Introduction

How to Use the Infrared Remote Control

Setting Up the Infrared Remote Control Sensor

Before using the infrared remote control, the LCD display’s remote control sensor 
must be positioned. The remote control sensor is a small black box located on the 
back of left of the LCD display. Press the small button near the base of the remote 
control sensor, and slide the sensor away from the LCD display until it locks in place. 
Reverse this procedure to return the sensor to its original position.

Operating Range of the Infrared Remote Control 

Point the infrared remote control toward the LCD display’s remote control sensor 
during button operation. Use the infrared remote control within a distance of about 10 
m from the front of the LCD display’s remote control sensor and at a horizontal and 
vertical angle of within 30° within a distance of about 10 m. 

The remote control system may not function when direct sunlight or strong illumination 

strikes the remote control sensor of the LCD display, or when there is an object in the path.

30°

30°

N O T E

TSB.book  Page 17  Monday, August 31, 2015  4:30 PM

Summary of Contents for TD-E502














































































Reviews:

No comments