background image

– 5 –

EN-9

EN-10

Hazardous Substances Declaration of Electrical and 

Electronic Products

1. Description of the marks for environmental protection service life

2. List of hazardous substances

The mark for environmental protection service life is formulated in accordance with 

Measures 

for the management of the restricted use of harmful substances in electrical and electronic 
products

 and 

Marking for the restriction of the use of hazardous substances in electrical and 

electronic product

 (SJ/T11364), and is applicable to the markings of electrical and electronic 

products sold in China.
As long as the electrical and electronic products are used normally in accordance with the 
safety and use instructions, the harmful substances contained in the products shall not leak 
out or mutate, cause serious pollution to the environment or cause serious damage to the 
person or property within marked years from the production date.
After the normal use of the product, please hand over the waste products that are within the 
service life of environmental protection or have just reached the service life to the enterprise 
with the qualification of recycling and disposal of waste electrical and electronic products.
In addition, this period is different from the warranty period of quality/function.

Part name

Hazardous substance  

Lead
 (Pb)

Mercury

 (Hg)

 Cadmium

 (Cd)

Hexavalent 

chromium

 (Cr(VI))

Polybrominated 

biphenyl (PBB)

Polybrominated 

diphenyl ether 

(PBDE)

Body of 3DW Diffusor

Stepping motor assembly 
(including wire)

Heat insulation material

Packaging printing

This form is compiled in accordance with the provisions of SJ/T 11364.

: Indicate that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements 

specified in GB/T 26572.

×: Indicate that the content of the hazardous substance in at least one homogeneous material of the product exceeds the limit 

requirements specified in GB/T 26572.

Summary of Contents for TCB-TDL0141SDY-E








Reviews: