Toshiba T-Series T1000, Installation And Operation Manual

Page: 26 / 114

16
T1000 Series UPS Installation and Operation Manual – 91074-002
7. Wiring the System
7.1 Layout - Power Module
TABLE 7-1: POWER MODULE BACK PANEL LAYOUT
No. Label Function
1 INPUT MCCB1
208V/240VDC 30A
Main On/Off circuit breaker.
2 REMOTEYE Cover plate for RemotEye
®
circuit card slot.
3 REM. CONTACTS Dry contacts DB9 connector.
4 OUTPUT L6-30R
208/240VAC 25A
Output receptacle for L6-30P cord (alternate output for 208/240 only)
5 EXT. BATTERY External Battery Module Anderson receptacle.
6 INPUT L N G Hardwire input terminals L ine, N eutral, and G round. (TB1)
7 REM. STOP Remote Stop Contacts. (TB4) (10 VDC)
8 EPO 240V Remote Emergency Power Off (EPO) Contacts. (TB3) (240/208 VAC)
9 OUTPUT L N G Hardwire output terminals L ine, N eutral, and G round. (TB2)
FIGURE 7-2: POWER MODULE -
HARDWIRED CONFIGURATION
(P/N T1P0A6000GVG,
T1P0A6000GVGR3)
FIGURE 7-3: POWER MODULE WITH
6-50P LINECORD (-L1) OPTION
(P/N T1P0A6000GVGL1,
T1P0A6000GVGR3L1)
3-Post Input Terminal Block, and
one each 3-Post Output Terminal
Block and NEMA L6-30R outlet.
Input Power Cord #10-3SO 6-50P
and two each NEMA L6-30R outlets.
FIGURE 7-1: POWER MODULE BACK PANEL LAYOUT
1 2
8
6 5
4 3
7
9
EPO 240V
REM. STOP
REMOTEYE INPUT MCCB1
208V/240VAC 30A
USE COPPER 75 ° C MIN.
CONDUCTORS ONLY
SEE INSTRUCTION MANUAL FOR WIRING
TERMINATION AND TIGHTENING TORQUE
OUTPUT L6-30R
208/240VAC 25A
REM. STOP
EPO 240V
REM. STOP
EPO 240V