Toshiba Surveillix NVS User Manual Download Page 85

Page: 85 / 118

CONTROLLING A PTZ CAMERA

The Surveillix DVRs provide control for a PAN/TILT/ZOOM camera in two different ways.

The first method is to use the Graphical PTZ Controller that appears when the PTZ button is clicked on the Display screen.

The second method is to use the mouse to control the camera directly from the live video display. (On-Screen Compass)

Using the Graphical PTZ Controller

Use the Arrow buttons to control the direction of
the PTZ camera.

To select a new camera, click the video display
of a different camera on the Display screen
display.

Note

Eight directions are available only for

select protocols. Only four of the PTZ

Control buttons work for all protocols

(UP, DOWN, LEFT, RIGHT).

Activate Corresponding
Preset Position

Displays Current

Camera

Arrow buttons

Summary of Contents for Surveillix NVS























































































































Search results

Summary of Contents for Surveillix NVS

Reviews:

Toshiba Surveillix NVS, User Manual, Page: 85 / 118

Search results

Summary of Contents for Surveillix NVS

Reviews: