Strata CIX Media Application Server Installation 07/06
5
Installation
Step 1: Assemble the MAS
Two Post Rackmount
The MAS is attached to a two post rack using four screws through the brackets on the front of the
cabinet.
Four Post Rackmount
1.
Secure the inner rails to the MAS chassis as shown in
Figure 5
MAS with Rail Attached
2.
Attach the outer rails to the front posts of the rack. Refer to
•
If the post has non-threaded holes use the M5 screws and M5 nut plates. The nut plate
must go behind the post. The rail flange goes between the nut plate and the post.
•
If the post has threaded M5 holes use the M4 screws and M4 nut plates. The screws will not
engage the threads in the post. The nut plate must go behind the post. The rail flange goes
between the nut plate and the post.
Figure 6
Outer Rail Attachments
0006-MAS
Use the M4x4 (small) screws provided
Notch in the rail
to attach the inner rail to the MAS chassis
engages chassis tab.
Front Post
Rack Post
Nut Plate
Outer Rail
