Toshiba Strata DK 2000-series User Manual Download Page 107

Page: 107 / 164

LCD Operation

Soft Keys

Strata DK Digital Telephone 6/00

Soft Key Prompts

Table 9

provides definitions of all of the Soft Key prompts that could appear on your

LCD.

Table 9

Soft Key Prompts

Soft Key

Definition

ABR

Activates Automatic Busy Redial after dialing a busy outside telephone number.

ACB

Activates Automatic Callback after reaching a busy station, CO line, or CO Line group.

BUSY

(Busy Override) Sends a call-waiting tone to a busy station.

CONF

Initiates or completes a conference.

EXEC

(Executive Override) Breaks into the conversation of a busy called station.

EXIT

Exits you from a conference; remaining parties are connected.

JOIN

Joins all parties to a conference while on a conference call.

LINE

Adds a CO line to an existing call while in the Conference mode. The LCD prompts you to
access a CO line after you press this key.

MESG

Sets a message waiting indication at a busy or unanswered station.

OVRD

Overrides options, busy mode, or overrides Do Not Disturb mode.

PGE

Parks an outside call and to gain access to a menu of options.

RING

Makes a called station ring when making a voice announce call to the station.

RLS

Disconnects a call and returns phone n to the idle state.

RTRN

Terminates a feature operation and to return to a previously displayed state.

STA.

Adds a station to an existing call while in the Conference mode. The LCD prompts you to
dial a station number after you press this key.

TALK

Makes a voice announcement to a called station that is ringing.

TRNS

Initiates or completes a Transfer while on an outside call. Press once for an immediate or
announced transfer, depending on system programming. Pressing TRNS again
completes the transfer.

Summary of Contents for Strata DK 2000-series





































































































































































Search results

Summary of Contents for Strata DK 2000-series

Reviews:

Related manuals for Strata DK 2000-series

Brands by name

Popular brands

Toshiba Strata DK 2000-series, User Manual

Search results

Summary of Contents for Strata DK 2000-series

Reviews:

Related manuals for Strata DK 2000-series

Brands by name

Popular brands