Program 13 Defining the Message Centre
System & Station
Strata DK40 Programming Manual Spring 1999
3-33
Program 13
Defining the Message Centre
Program Type:
Station
Initialised Default:
No port assigned
Program 13 Overview
This program assigns a station as the Message Centre.
Each digital, electronic and standard telephone can receive a maximum of four message
waiting indications per [PDN]. One of these four is reserved for the designated Message
Centre. The Message Centre should be the customer’s main answering position.
Typically, the Message Centre is a voice mail device, a digital or electronic telephone with a
DSS console (DDSS or HDSS), or an add-on module. If incoming traffic to a DDSS or HDSS
console attendant is heavy, another station can be assigned as the Message Centre.
Notes
◆
The Message Centre is allowed to perform “Message Waiting,” even if disallowed
on all other stations.
◆
Assign the Message Centre to the customer’s main answering position: a station or
the lowest port (in VM group) of the customer’s voice mail device (
for voice mail group port assignments), whichever the customer specifies.
(QWHU 3URJ 0RGH
0
6SNU
4 6
+ROG
0
6SNU
4
+ROG
0
6SNU
& &
+ROG
0
6SNU
& &
+ROG
SELECT = 1
PORT = Station Logical Port Number
Enter the station logical port number of the station to be defined
as the Message Centre.
For In Band (DTMF) voice mail integration, enter the lowest
KSTU3/RSTU2 standard telephone or Stratagy DK port
connected to the VM device.
Port Number
