background image

E

ng

lis

h

 

-Repeat Single (currently playing file)

 

-Repeat ALL (current folder)

 

-Off (cancel)

 

Tip:

 

-For VCD2.0/SVCD discs, repeat playback is not 

possible if the PBC mode is turned on.

 

Repeating a section within a title/track

 

You can repeat the playback of a specific segment 

within a title or track. To do this, you must mark the 

start and end of the segment you want. 

A

 

While playing a disc, press A - B at your chosen 

starting point.

B

 

Press A - B again at your chosen end point.

  

 The section will now repeat continuously.

C

 

To exit the sequence, press A - B.

 

Viewing the disc playback Information

 

You can view the disc information (such as current 

title/chapter/track  number,  total  playing  time  or 

remaining time on the disc) without interrupting the 

disc playback.

A

 

During playback, press DISPLAY repeatedly on the 

remote control.

  

The available disc information appears on the TV 

screen with the following sequence.

       

 DVD Video

                                             (DVD)

 

Time

 

 Time  

00

03

33/01

24

46

 

(DVD)

 

Title 

 

Title  1/1

 

(DVD)

 

Chapter

 

Chapter  2/8

 

(DVD)

 

Audio

 

Audio 1/1      6Ch  Eng

 

 

(DVD)

 

Subtitle

 

Subtitle      1/8     Eng

 

(DVD)

 

Angle

 

Angle 1/4

                      (DVD)

 

 VCD2.0

                      (VCD)

       Time

 

 Time             00

03

33/00

05

00

  (VCD)

 

Track

 

 

Track 

 3/24

  (VCD   PBC OFF)

 

OR

 

Time

 

 Time             00

03

33/00

05

00

     (VCD   PBC ON)

 

 

PBC On

  (VCD   PBC ON)

 

Title/Chapter/Track/Time selection

A

 

Press T-SEARCH, then press 

/

 to select 

 

{ Time }, { Title }, { Chapter } or { Track }.

   For VCD

 

PBC OFF

 

     Track 

---

 

     Time 

--:--:--

 

(desired time of the current track)

 

     Disc Time 

--:--:--

 

(desired time of the disc)

 

For DVD:

 

     Title 

---

 

     Chapter 

 ---

 

     Time 

--:--:--

 

(desired time of the disc)

Playback Feature

B

 

Use the number buttons ( 0-9 ) to input a valid 

number or time ("0" cannot be input as the first 

number). (This function only apply to DVD/VCD/CD/

SVCD.)

C

 

Press OK to confirm.

  

The playback skips to the selected title/chapter/

track/time.

 

Angle

  

 When {Angle} information appears on the screen, 

 

press  ANGLE  button  on  the  remote  control 

repeatedly to switch between different angles.

  

Playback will go to the selected angle.

 

Special DVD Features

 

 

Playing a Title

A

 

Press TITLE.

 

The disc title menu appears on the TV screen.

B

 

Use 

/

/

/

 or number buttons (0-9) to select a 

play option.

C

  

Press OK to confirm.

 

Changing the Audio Language

 

For DVD

 

Press AUDIO repeatedly to select different audio 

languages.

 

Changing the Audio Channel

 

For VCD

  

Press AUDIO to select the available audio channels 

provided by the disc (Left, Right, Mix, Stereo).

 

Subtitles

  

Press  SUBTITLE  repeatedly  to  select  different 

subtitle languages.

  Special VCD and SVCD Features

 

For VCD with Playback Control ( PBC ) feature  

(version 2.0 only)

  

Press MENU to toggle between 

'

 PBC On 

'

 and 

'

 

PBC Off 

'

.

 

If you select 

'

 PBC On 

'

, the disc menu ( if 

available ) will appear on the TV.

 

Use the number buttons ( 0-9 ) to select a play 

option.

  

Press PREV 

 / NEXT 

 to go to the previous 

or next track.

  

When PREV  

 is pressed after the first 5 

seconds of playback, playback will start from the 

beginning of the current track. If you press the button 

within the first 5 seconds, playback will start from the 

beginning of the preceding track.

  

During playback, pressing RETURN will return to 

the menu screen (if PBC is on).

 

If you want to skip the index menu and playback 

directly from the beginning.

  

Press MENU on the remote control to turn the PBC 

off.

            

Helpful hint

 

The operating features described here might not be possible for certain discs.

                                    Always refer to the instructions  supplied with the discs. 

Summary of Contents for SD4200KC





























Reviews: