OD-A017-02
TOSHIBA DVD-RAM SD-W1111
‘99/06/26
Version
1.0
Page 10
Product Specification
5.
Power supply specifications
5.1
Input power supply
+5V ± 5%, peak current 3A (Max. 2 sec., at spindle motor ON/OFF)
Note: Power supply current is usually 1.4A. But at a spin-up time the current increase to 3.0A. If the
power supply cable that is long and thin, power supply voltage is drop and out of the
operational condition of this drive. Please use a short and thick power supply cable.
Note: The voltage drop with the power supply cable is approximately as follows.
Wire
Resistance (
Ω
/km)
Voltage drop (V)* at 1m wire length and 3A current
AWG22 (Twist wire)
57.4
0.344
AWG18 (Twist wire)
23.7
0.142
AWG22 (Single wire)
56.3
0.338
AWG18 (Single wire)
22.2
0.133
* The drop voltage in the both of the ground line and the power supply line
* This value changes according to the electric wire maker and the use temperature.
5.2
Power consumption
Average
Less than 6.7W
Stand-by period:
Less than 6.0W
Seek period:
Less than 11.0W
Sleep period:
Less than 1.0W
5.3
Allowable ripple voltage
Less than 100 mVp-p (includes spike noise)
6.
Mechanical specifications
6.1
Dimensions
Refer to the drawing attached. (3. External views and dimensions)
6.2
Mass
1.14kg (Net ,include front bezel)
6.3
Disc loading
Auto-loading tray system (Bare disc, cartridge disc)
Tray load/unload mechanism
1)
Load/Unload operation by the load/unload switch
2)
Load operation by pressing the tray.
3)
Load/Unload operation by the command.
4)
Emergency eject function
6.4
Optical head auto-lock mechanism
To protect the optical head while transporting the drive, the optical head auto-lock function is
provided.
Be sure to avoid transport with a disc loaded.
