Toshiba SD-V392 - DVD/VCR Combo Owner'S Manual Download

Page: 37 / 80

Recording (VCR)

Timer recording

Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.

Timer recording

Notes:
• Press CANCEL to move cursor backward for correction.
• To record from external source set the channel to “L1” or

“L2”.

Notes:
• If the timer symbol (

) blinks when the timer recording ended,

the TV program has not been completely recorded because of
an insufficient tape length. Press TIMER REC to cancel the
timer program or press EJECT to remove the cassette tape.

• During timer recording standby mode, the VCR mode cannot be

operated. To use the VCR, press TIMER REC at first, then press
VCR DVD selector to change to VCR mode. After you use the
VCR, press TIMER REC again to put the VCR into timer
recording standby mode.

• If you press TIMER REC during timer recording, the recording

operation will be interrupted. If you press TIMER REC again
within the programmed time, the recording operation will start
again.

• After a power failure or disconnection of the power plug, all

programmed recording settings and time display will be lost
upon resumption of power. In this case, reset the clock

and

reprogram any timer recording.

Press VCR MENU. Select “TIMER REC SET”,
then press ENTER.

Preparation:

• Press VCR DVD selector to select the VCR mode.
• Load a cassette tape with the erase prevention tab

intact.

• Check the time and date are correct

Example: Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: SLP).

Press SET + or – to select one of the program
line, then press ENTER.

Press SET + or – to select the date, then press
ENTER.

Set the start time, end time, channel and tape
speed as in step 3.

TIMER REC SET

AUTO REPEAT ON OFF

ON OFF

SAP

CH SETUP

SYSTEM SETUP

á+/-/ENTER/MENU ñ

á+/Ð/ENTER/CANCEL/MENU ñ

DATE

START END

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

26(SU) 11:00

11:30

125

SLP

á+/Ð/ENTER/CANCEL/MENU ñ

DATE

START END

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

Ð Ð Ð Ð Ð Ð Ð : Ð Ð

Ð : Ð Ð Ð Ð Ð

26(SU) 11:00

11:30

125

SLP

To enter other programs, repeat step 2
through 4.

• To return to the normal screen,

press VCR MENU twice.

Press TIMER REC. The timer symbol (

) will

appear on the display and the VCR stands by
for recording.

At the same time, VCR mode will
change to DVD mode automatically.
You can use DVD even if the VCR is
in the timer recording mode.
If you do not use the DVD, turn the
power off.

Notes:
• The timer recording will start at 5 seconds before the time

you predetermined.

• If the timer symbol(

) does not appear on the display in

spite of the pressing of TIMER REC, the cassette may not
have been loaded.

• If the cassette is ejected in spite of the pressing of TIMER

REC, the erase prevention tab of the cassette may have
been removed.

2,3

1–3

VCR DVD

TIMER REC

CANCEL