TOSHIBA SD-M1401 DVD-ROM Drive
3
Installing DVD-ROM
B
efore you begin to install your DVD-ROM, make sure you
have the items listed below. Some of these items will
not come with your DVD-ROM. See your local computer
retailer to purchase them.
INSTALLATION REQUIREMENTS
❑
SCSI Host Adapter Board and SCSI driver software
❑
DVD/MPEG Card (Optional)
❑
SCSI Interface Cable
INSTALLATION
In order to install your DVD-ROM successfully, you will need to com-
plete the following steps:
☛
Install SCSI adapter board in your computer (if not already in-
stalled).
☛
Set jumper settings on DVD-ROM.
☛
Install DVD-ROM inside your computer.
☛
Using a SCSI cable, connect DVD-ROM to SCSI interface card.
☛
Connect computer power cable to internal DVD-ROM drive.
☛
Connect a sound cable to your DVD-ROM (optional).
Additional audio connections may be available when using a
DVD/MPEG card (see MPEG card installation instructions).
☛
Load SCSI Host Adapter driver software.
