background image

8

Introduction

DIGITAL VIDEO

About this owner’s manual

This owner’s manual explains the basic instructions of
this DVD/VCR. Some DVD video discs are produced in
a manner that allows specific or limited operation during
playback. As such, the DVD/VCR may not respond to all
operating commands. This is not a defect in the DVD/
VCR. Refer to instruction notes of discs.

” may appear on the TV screen during operation.

A “

” means that the operation is not permitted by the

DVD/VCR or the disc.
For example, sometimes it is unable to stop the
playback of copyright message of the disc when the
STOP ( ) button is pressed. Alternatively, the “ ” may
also indicate that the feature is not available for the disc.

Notes on region numbers

The region number of this DVD/VCR is 1. If region
numbers, which stand for their playable area, are printed
on your DVD video disc and you do not find 

1

 or 

ALL

 ,

disc playback will not be allowed by the player. (In this
case, the DVD/VCR will display a message on-screen.)

On Video CDs

This DVD/VCR supports Video CDs equipped with the
PBC (Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback
variations depending on types of discs.

• Video CD not equipped with PBC function

(Version 1.1)

Sound and movie can be played on this DVD/VCR in
the same way as an audio CD.

• Video CD equipped with PBC function

(Version 2.0)

In addition to operation of a Video CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this owner’s
manual may not work with some discs.

Playable discs

This DVD/VCR can play the following discs.

• You cannot play discs other than those listed above.
• You cannot play discs of DVD-RAM, DVD-ROM,

Photo CD, etc., or non standardized discs even if they
may be labeled as above.

• Some CD-R/RWs cannot be played back depending

on the recording conditions.

• This DVD/VCR uses the NTSC color system, and

cannot play DVD video discs recorded in any other
color system (PAL, SECAM, etc.).

Notes on discs (continued)

DVD
video
discs

Disc Mark

Contents

Disc

Size

Maximum

playback time

Video
CDs

Approx. 4 hours

(single sided disc)

Approx. 8 hours

(double sided disc)

Approx. 80 minutes

(single sided disc)

Approx. 160 minutes

(double sided disc)

Approx. 74 minutes

Approx. 20 minutes

8 cm

12 cm

8 cm

12 cm

Audio

+

Video

(moving

pictures)

Audio

+

Video

(moving

pictures)

Audio
CDs

Approx. 74 minutes

Approx. 20 minutes

8 cm

(CD

single)

12 cm

Audio

The following discs are also available.

DVD-R/RW discs of DVD video format
CD-R/CD-RW discs of CD-DA, Video CD, SVCD,
MP3, WMA or JPEG format
Kodak Picture CD and FUJICOLOR CD format

Some of these discs may be incompatible.

J2D8

1

701A (E)p02-13.p65 28/5/04, 1:39 PM

8

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Downloaded From Disc-Player.com Toshiba Manuals

Summary of Contents for SD-K531SUA








































Reviews: