background image

17

Connections

VHF/UHF

IN (ANT)

A

B

OUT

(TV)

IN

(ANT)

VHF/UHF

IN (ANT)

A

B

OUT

(TV)

IN

(ANT)

This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scram-
bled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Con-
sult your local cable company for more information concerning connection to their descrambler equipment. There are
many ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.

IMPORTANT: Make sure the TV/CABLE menu option is set to the “CABLE” mode.

Incoming Cable

Allows:

* Recording of one channel while watching another.
* Using the programmable timer to record only the channel selected at the converter box.
* Recording of all channels through the converter box.

Prevents:

* Watching scrambled channels while recording another channel.
* Using the DVD/VCR tuner to select channels.

DVD/VCR

Splitter

Converter/Descrambler

TV

DVD/VCR

Converter/Descrambler

A/B Switch

TV

Incoming Cable

Splitter

Allows:

* Recording of nonscrambled channels.
* Recording of one channel while watching another.
* Watching premium channels through the converter while recording nonscrambled channels.
* Using the programmable timer.

Prevents:

Recording scrambled channels.

DVD/VCR

Splitter

TV

Converter/Descrambler

A/B Switch

VHF/UHF

IN (ANT)

A

B

OUT

(TV)

IN

(ANT)

Allows:

* Recording of all channels through the converter box.
* Recording a scrambled or unscrambled channel while watching another (scrambled or

unscrambled) channel.

* Using the programmable timer to record only the channel selected at the converter box.

Prevents:

Using the DVD/VCR tuner to select channels.

A/B Switch

Incoming Cable

Converter/Descrambler

4

5

6

J2D8

1

701A (E)p14-17.p65 28/5/04, 1:39 PM

17

Summary of Contents for SD-K531








































Reviews: