23
Connections
To wall outlet
Connecting to a display (Using a HDMI cable)
About HDMI
HDMI (High Definition Multimedia Interface) supports both
video and audio on a single digital connection for use with
DVD players, DTV, set-top boxes, and other AV devices. HDMI
was developed to provide the technologies of High Bandwidth
Digital Content Protection (HDCP) as well as Digital Visual
Interface (DVI) in one specification. HDCP is used to protect
digital content transmitted and received by DVI-compliant or
HDMI-compliant displays.
HDMI has the capability to support standard, enhanced, or high-
definition video plus standard to multi-channel surround-sound
audio. HDMI features included uncompressed digital video, a
bandwidth of up to 2.2 gigabytes per second (with HDTV)
signals), one connector (instead of several cables and
connectors), and communication between the AV source and
AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI licensing LLC.
Switching the video quality (HDMI mode)
using HDMI button on the remote control
or
HDMI SELECT button on the front panel
.
Press
HDMI
on the remote control or
HDMI
SELECT
button on the front panel to receive a
suitable video quality in STOP mode. The video
quality is required to match your TV having HDMI
feature and suitable quality. Please also check your
TV owner’s manual.
Press this button to change the output signals as
below. See the HDMI indicator and select the
appropriate output signal.
576p, 720p and 1080i are signals created with this DVD
Player from original 480i/576i signal. The resolution of the
picture may not be increased even if they are selected.
HDMI indicator
Video output signal
illuminates “ • 1080i”
1080i (Interlaced)
illuminates “ • 720p”
720p (Progressive)
illuminates “ • 576p”
576p (Progressive)
Press
Press
Press
HDMI-compatible
display
HDMI Cable
(not supplied)
To HDMI
Output
TM
Available output signals are below:
• 576p (progressive)
• 720p (progressive)
• 1080i (interlaced)
• Make the following setting.
On-screen display
Select:
Page
“PCM”
“Digital Output”
HDMI
“Video Output”
31
32
3) Connect the DVD player to your TV with the HDMI
cable. Disconnect the composite yellow cable.
4) Change Video input on your TV to HDMI input.
If the TV has the HDMI input, connect the DVD Player
and make the setting as follows:
1) Connect the DVD player to your TV with the
composite cable(yellow), then press
SETUP
button
on the remote control.
2) In the Setup menu, first select “Video” and then select
“Video Output”. Then change the mode to “HDMI”.
5) If no sound is heard, change the Audio Digital Output
setting to "PCM" see page 31.
