Toshiba SD-33VB, Service Manual

Page: 17 / 197

1-16
Before Operation - VCR part
How to use the main menu
This DVD+VCR can easily be programmed by
using the menus displayed on screen.
The menus are controlled from the Remote
Control Handset.
11
Switch on your TV set and video recorder by pressing
the
++++////1 1 1 1
button.
22
Press VCR MENU button.
The main menu will appear on the TV screen.
z z REC - Timer recording setting (see p. 24).
z z PR SET - Manual tuning setting (see p. 15).
z z
ACMS - ACMS (Automatic Channel Memory
System) (see p. 14).
z z TIME DATE - Date & clock setting (see p. 13).
O
SYSTEM - To set the Colour TV System
(see p. 13).
O
Dr. - To check a problem with your VCR
(see p. 33).
O
F.OSD ON/OFF - To display the operational
mode of your VCR (see p. 32).
O
16:9/4:3 - To select the aspect ratio of your TV
(see p.33).
O
OPR - To improve the playback picture
(see p. 21).
O
NIC - To activate or deactivate the NICAM digital
sound (see p. 32).
33
Press
1
and
2
to select the desired menu.
Press ENTER/OK and use
3
or
4
to select.
44
Press VCR SETUP to return to a TV picture.
Tuning in TV Stations Automatically
If the TV broadcast signal is weak your DVD+VCR
may not detect the necessary information and will
not be able to store them correctly. To overcome this
problem please turn to the MANUAL TUNING
section on page 15.
11
Press
++++////1 1 1 1
to turn on your DVD+VCR.
22
Press VCR MENU button.
The main menu will appear on the TV screen.
Press
1
or
2
to select the ACMS .
Press ENTER/OK .
33
Press ENTER/OK again to start the automatic
tuning process.
44
The TV STATION TABLE will appear when tuning
is completed.
Press
VCR MENU to save your settings.
Note
Please note currently only a limited number of TV
companies transmit the
Programme Delivery Control
(PDC) signal which enables your DVD+VCR to suc-
cessfully identify and store them. If your DVD+VCR has
difficulty in identifying a TV station please turn the page
to find out how to manually tune in and name a TV sta-
tion. While automatic tuning is taking place the time and
date will set automatically.
If - - :- - appears in the DVD+VCR display it means that
the broadcast signal is weak and the clock was not set.
Please turn to
CLOCK SET section of this book on
page 13.
The DVD+VCR’s clock will be set automatically when
automatic tuning has finished. If the clock is wrong
please see “Setting the clock manually” on page 13.
REC
ACMS
Pr-12
ACMS
Pr-12
OK i
SYS-
TEM
NIC
PSET
R
OSD
ON
OFF
OSD
f
1 2
TIME
DATE
16:9
4:3
Dr.
VCR
OPR
02 C33 00 BBC2
03 C23 00 ITV
04 C30 00 CH4
05 C37 00 CH5
06 - - - - - - - - -
07 - - - - - - - - -
08 - - - - - - - - -
01 C26 00 BBC1
OK i , DELETE :
MOVE :
PSET
R
REC
REC
OK
i
SYS-
TEM
NIC
PSET
R
Pr-12
ACMS
OSD
ON
OFF
OSD
f
1 2
TIME
DATE
16:9
4:3
Dr.
VCR
OPR