User’s Manual
EN-5
3D SOUND BAR SB1
Quick Tour
This section identifies the various components of the 3D sound bar SB1.
For a description of each component, please refer to the table beneath
each illustration.
3D Sound Bar SB1
Front view
(Sample Illustration) The front view of the 3D sound bar SB1
Item
Component
Description
1
INPUT
Selects the source (in the sequence of Aux-in,
Line-in, Optical, Coaxial and then back to Aux-
in).
The sound bar is set to Aux-in mode by default.
The sound bar will restore from your last selected mode when it is back
from the standby mode with the AC adaptor connected. But if you
disconnect the AC adaptor and connect it again, the sound bar will start
with Aux-in mode by default.
NOTE
Item
Component
Description
2
MODE
Sound mode selects.
3
/-
Increases/decreases the volume.
4
POWER
Turns the sound bar on or puts it into the
standby mode.
5
Remote
sensor
Receives the remote control’s signals.
6
Power
indicator
Glows white while the sound bar is ON and red
while it is OFF or in the standby mode.