Toshiba Satellite U400-10M User Manual Download Page 88

Page: 88 / 177

User’s Manual

4-27

Operating Basics

Disconnecting

To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the

connector.

2. In the same way, pull the cable’s other connector out of the computer.

Using the FM tuner

The availability of this feature is depending on the model you purchased.
1. Plug the FM tuner antenna into the FM Antenna jack.

Plug FM tuner antenna into the jack

Select

Start

All Programs

FM Tuner Utility

to start FM software.

Wireless communications

The computer’s wireless communication function supports both Wireless

LAN and Bluetooth devices.
Only some models are equipped with both Wireless LAN and Bluetooth

functions.

FM tuner antenna

FM Antenna

Jack

Summary of Contents for Satellite U400-10M


















































































































































































Search results

Summary of Contents for Satellite U400-10M

Reviews:

Related manuals for Satellite U400-10M

Brands by name

Popular brands

Toshiba Satellite U400-10M, User Manual

Search results

Summary of Contents for Satellite U400-10M

Reviews:

Related manuals for Satellite U400-10M

Brands by name

Popular brands