Toshiba Satellite U300 Maintenance Manual Download Page 171

Page: 171 / 361

Test Program for Field.

Pass Count

Displays the number of times the test has been executed.

Error Count

Displays the number of errors which have occurred during the test.

Write Data

Displays only the test data that has failed to compare during the

test while being written during the test.

Read Data

Displays test data that has failed to compare during the test while

being read during the test.

Test Address

Displays the Test Address. (The format differs for each test.)

Error Status

Displays the error status.

Error Name

Displays the name of the error.

Satellite U300 and Satellite Pro U300 Tests and Diagnostics Manual

Summary of Contents for Satellite U300










































































































































































































































































































































































Search results

Summary of Contents for Satellite U300

Reviews:

Related manuals for Satellite U300

Brands by name

Popular brands

Toshiba Satellite U300, Maintenance Manual

Search results

Summary of Contents for Satellite U300

Reviews:

Related manuals for Satellite U300

Brands by name

Popular brands