manualshive.com logo in svg

Toshiba Satellite Radius X20W-D, User Manual

Share
Download
Toshiba Satellite Radius X20W-D User Manual Download Page 69

Depending on the model you purchased, one of the following USB Type-
C™ adapters might be provided.

Always use the TOSHIBA USB Type-C™ adapter that is included with
your computer or TOSHIBA accessories.
Disconnect any devices and cables from the USB Type-C™ adapter
when connecting/disconnecting the AC adapter or the USB Type-C™
adapter.
When connecting the USB Type-C™ adapter, Thunderbolt function is
not supported.
If AC adapter is connected via USB Type-C™ adapter, battery
charging time might become longer.
Do not connect other USB Type-C™ adapter to USB Type-C™ port of
USB Type-C™ adapter.

USB-C™ to HDMI™ Adapter
This adapter provides: USB Type-C™ port (Power Delivery Charging)
and HDMI™ out port.

1

2

1. HDMI™ out port

2. USB Type-C™ port (Power
Delivery Charging)

The output resolution of HDMI™ out port on this adapter is up to
3840x2160 @60Hz.
The USB Type-C™ port (Power Delivery Charging) on this adapter is
used for connecting AC adaptor only. USB data transmission is not
supported by this port.

User's Manual

4-17

Summary of Contents for Satellite Radius X20W-D






























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands