manualshive.com logo in svg

Toshiba Satellite Pro Z20t-C Series, User Manual, Page: 83 / 142

Share
Download
Toshiba Satellite Pro Z20t-C Series User Manual Download Page 83

There are no fastening screws for an external monitor cable on the
External RGB monitor port. However, external monitor cables which have
connectors with fastening screws can still be used.

2.

Turn the external monitor's power on.

When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is a color or monochrome device.
When displaying desktop on an external RGB monitor, desktop is
sometimes displayed on the center of the monitor with black bars around
desktop (with small size).
At that time, please read the manual of the monitor and set the display
mode which is supporting at the monitor. Then it will be displayed with
suitable size with correct aspect ratio.

HDMI™ port

HDMI™ (High-Definition Multimedia Interface™) port digitally transfers both
video and audio data without reducing the quality. HDMI™-compatible
external display devices including televisions can be connected via the
HDMI™ port.
To connect an HDMI™-compatible display device, do the following:

As the port operation of all HDMI™ display devices have not been
confirmed, some HDMI™ display devices might not function properly.
To connect a device to the HDMI™ out port, you must purchase a
suitable HDMI™ cable.

1.

Plug one end of the HDMI™ cable into the HDMI™ in port of the
HDMI™ display device.

2.

Plug the other end of the HDMI™ cable into the HDMI™ port on your
tablet computer or on the keyboard dock.

3.

Turn the HDMI™ display device's power on.

Figure 4-19 Connecting the HDMI™ port

1

2

1. HDMI™ port

2. HDMI™ cable (Type A connector)

User's Manual

4-26

Summary of Contents for Satellite Pro Z20t-C Series















































































































































Reviews:

No comments