Toshiba Satellite Pro U300 Maintenance Manual Download

Page: 104 / 313

Test Program for Field.

Satellite U300 and Satellite Pro U300 Tests and Diagnostics Manual

3.1 Tests and Diagnostics Software Overview

This chapter explains how to use the Tests and Diagnostics Software for the Satellite U300
and Satellite Pro U300 computer systems.

NOTES: Before starting the Tests and Diagnostics software:

1. Check all cables for loose connections.

2. Exit any application and close Windows.

The Diagnostics Menu consists of the following options:

Diagnostic Test

Running Test

DMI Information

Log Utilities

System Configuration

Option

The Diagnostic Test Menu consists of the following functional tests:

System Test

Memory Test

Keyboard Test

Display Test

Floppy Disk Test

Hard Disk Test

Real Time Clock Test

Cache Memory Test

High Resolution Display Test

Multimedia Test

Memory2 Test

FDD & HDD Error Retry Count Set

The following equipment is required to perform some of the diagnostic test programs:

The Diagnostics Disk (all tests)

A formatted working disk for the floppy disk drive test (all tests)

A CD test media (Toshiba Backup CD ROM for the CD-ROM test)

The following sections detail the tests contained within the Diagnostic Test Menu. Refer to
Sections 3.18, 3.19, 3.20 and, 3.21 for detailed information on the remaining functions of the
Tests and Diagnostics software.

Summary of Contents for Satellite Pro U300


























































































































































































































































































































Search results

Summary of Contents for Satellite Pro U300

Reviews:

Related manuals for Satellite Pro U300

Brands by name

Popular brands

Toshiba Satellite Pro U300, Maintenance Manual

Search results

Summary of Contents for Satellite Pro U300

Reviews:

Related manuals for Satellite Pro U300

Brands by name

Popular brands