Toshiba Satellite Pro T210 series, Maintenance Manual

Page: 48 / 192

2 Troubleshooting Procedures
Satellite T210/T215 Series Maintenance Manual
15
This section describes how to determine if the computer’s display is functioning properly.
The process is outlined in Figure 2-3. Start with Procedure 1 and continue with the other
procedures as instructed.
Procedure 1: External display check
Procedure 2: Diagnostic check
Procedure 3: Connector and replacement check
Procedure 1 External display check
Connect an external display to the computer’s external monitor port, and then boot the
computer. The computer automatically detects the external display.
If the external display works correctly, the internal LCD may be damaged. Go to Procedure 3.
If the external monitor appears to have the same problem as the internal monitor, the system
board may be damaged. Go to Procedure 2.
Procedure 2 Diagnostic check
The Display Test program is stored on the computer’s Diagnostics disk. This program checks
the display controller on the system board. Insert the USB memory disk in the computer, turn
on the computer and run the test. Refer to Chapter 3,
Tests and Diagnostics for details.
If an error is detected, go to Procedure 3. If an error is not detected, the display is functioning
properly.