4-78 [CONFIDENTIAL] TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784)
Installing the CPU/fin/DC fan
To install the CPU/fin/DC fan, follow the steps below and refer to Figure 4-38 to 4-43.
2.
Set the
CPU
to the correct position in the
CPU socket
. Make sure the position of the
NOTE: When replacing the CPU with a new one, stick the insulator (INSU SQUARE) to
1.
Make sure that the
cam
of the CPU socket is in the unlock (OPEN) position.
CPU (
triangle mark
) is correct to avoid damaging pins on the CPU.
the CPU in place.
3.
Lock the CPU by rotating clockwise the
cam
on the CPU socket by 180 degrees with
a flat-blade driver.
Figure 4-42 Installing the CPU
Mark
CPU
CPU socket
INSU SQUARE
INSU SQUARE
