Toshiba Satellite Pro C50-A Series User Manual Download Page 85

Page: 85 / 138

Maximum volume output delivering maximum volume without creating

clipping or distortion

Dialog enhancement for clear and intelligible vocals

Bass enhancement for rich, low frequency production

High frequency definition for crisp details

Consistent volume level across content

To access the utility, Click

Desktop -> Desktop Assist -> Media &

Entertainment -> DTS Studio Sound

U.S. patents apply to this product. See http://patents.dts.com.

Manufactured under license from DTS Licensing Limited.

DTS Sound

DTS Sound™ utilizes advanced patented techniques to retrieve audio cues

buried in the original source material and deliver immersive surround sound

complete with deep, rich bass and crystal clear dialog.
DTS Sound is provided with some models. It provides the following

features:

Immersive surround sound with bass and dialog enhancement

Broad sweet spot with elevated sound image

Improved volume output delivering maximum volume without creating

clipping or distortion

Dialog enhancement for clear and intelligible vocals

Bass enhancement for rich, low frequency production

High frequency definition for crisp details

To access the utility, Click

Desktop -> Desktop Assist -> Media &

Entertainment -> DTS Sound

U.S. patents apply to this product. See http://patents.dts.com.

Manufactured under license from DTS Licensing Limited.

Realtek HD Audio Manager

You can confirm and change the audio configuration using the

Realtek HD

Audio Manager

. To launch the

Realtek HD Audio Manager

Click

Desktop -> Desktop Assist -> Control Panel -> Hardware

and Sound -> Realtek HD Audio Manager

When you first launch the Realtek HD Audio Manager, you will see two

device tabs.

Speakers

is the default output device.

Microphone

is the

default input device. To change the default device, click the

Set Default

Device

button under the chosen device tab.

Information

Click the

Information

button to view hardware information, software

information, and language setting.

User's Manual

4-41

Summary of Contents for Satellite Pro C50-A Series











































































































































Search results

Summary of Contents for Satellite Pro C50-A Series

Reviews:

Related manuals for Satellite Pro C50-A Series

Brands by name

Popular brands

Toshiba Satellite Pro C50-A Series, User Manual

Search results

Summary of Contents for Satellite Pro C50-A Series

Reviews:

Related manuals for Satellite Pro C50-A Series

Brands by name

Popular brands