background image

User’s Manual

vi

Satellite P750/P755/P750D/P755D Series

Copyright

© 2011 by TOSHIBA Corporation. All rights reserved. Under the copyright 
laws, this manual cannot be reproduced in any form without the prior 
written permission of TOSHIBA. No patent liability is assumed, with respect 
to the use of the information contained herein.

First edition March 2011

Copyright authority for music, movies, computer programs, databases and 
other intellectual property covered by copyright laws belongs to the author 
or to the copyright owner. Copyrighted material can be reproduced only for 
personal use or use within the home. Any other use beyond that stipulated 
above (including conversion to digital format, alteration, transfer of copied 
material and distribution on a network) without the permission of the 
copyright owner is a violation of copyright or author's rights and is subject to 
civil damages or criminal action. Please comply with copyright laws in 
making any reproduction from this manual.

Disclaimer

This manual has been validated and reviewed for accuracy. The 
instructions and descriptions it contains are accurate for your computer at 
the time of this manual’s production. However, succeeding computers and 
manuals are subject to change without notice. TOSHIBA assumes no 
liability for damages incurred directly or indirectly from errors, omissions or 
discrepancies between the computer and the manual.

Trademarks

Intel, Intel SpeedStep, Intel Core and Centrino are trademarks or registered 
trademarks of Intel Corporation.

AMD, the AMD Arrow logo, PowerPlay, Vari-Bright and combinations 
thereof are trademarks of Advanced Micro Devices, Inc.

Windows, Microsoft and Windows logo are registered trademarks of 
Microsoft Corporation.

Photo CD is a trademark of Eastman Kodak Company.

Memory Stick, Memory Stick PRO, Memory Stick PRO Duo and i.LINK are 
trademarks or registered trademarks of Sony Corporation.

ConfigFree is a trademark of TOSHIBA Corporation.

TouchPad is a trademark of Synaptics, Inc

Wi-Fi is a registered trademark of the Wi-Fi Alliance.

Secure Digital and SD are trademarks of SD Card Association.

MultiMediaCard and MMC are trademarks of MultiMediaCard Association.

xD-Picture Card is a trademark of FUJIFILM Corporation.

ExpressCard is a trademark of PCMCIA.

Summary of Contents for Satellite P750 Series






























































































































































































































Reviews: