manualshive.com logo in svg

Toshiba Satellite P750 Series, User Manual

The Toshiba Satellite P750 Series is a high-performance laptop designed for power users. With its sleek design and impressive features, this device offers a seamless user experience. Explore its capabilities with our comprehensive User Manual, available for free download at manualshive.com. Upgrade your digital journey today.

Share
Download
background image

User’s Manual

6-3

Power and Power-Up Modes

DC IN indicator

Check the 

DC IN

 indicator to determine the power status with the AC 

adaptor connected - the following indicator conditions should be noted:

Power indicator

Check the 

Power

 indicator to determine the power status of the computer - 

the following indicator conditions should be noted:

Battery

This section explains battery types, use, recharging methods and handling.

Battery types

The computer has two different types of batteries.

Battery pack

When the AC adaptor is not connected, the computer's main power source 
is a removable lithium ion battery pack, also referred to in this manual as 
the main battery. You can purchase additional battery packs for extended 
use of the computer away from an AC power source although you should 
not change the battery pack while the AC adaptor is connected.

Before you remove the battery pack, save your data and shut down the 
computer, or place the computer into Hibernation Mode. Please be aware 
that, when placing the computer into Hibernation Mode, the contents of 
memory will be saved to the hard disk drive, although for safety sake, it is 
best to also save your data manually.

White

Indicates the AC adaptor is connected and is 
correctly supplying power to the computer.

No light

Under any other conditions, the indicator does not 
light.

White

Indicates power is being supplied to the computer 
and the computer is turned on.

Blinking amber

Indicates that the computer is in Sleep Mode and 
that there is sufficient power available (AC adaptor 
or battery) to maintain this condition. In Sleep 
Mode, this indicator will turn on for one second and 
off for two seconds.

No light

Under any other conditions, the indicator does not 
light.

Summary of Contents for Satellite P750 Series






























































































































































































































Reviews:

No comments

Related manuals for Satellite P750 Series

Raon Vega Product Manual preview
Vega
Brand: Raon Pages: 23
Fujitsu Siemens Computers CELSIUS Mobile A Operating Manual preview
CELSIUS Mobile A
Brand: Fujitsu Siemens Computers Pages: 95
Medion Akoya E6222 Instruction Manual preview
Akoya E6222
Brand: Medion Pages: 306
Hena CW14Q7B User Manual preview
CW14Q7B
Brand: Hena Pages: 7
Acer Packard Bell 314 User Manual preview
Packard Bell 314
Brand: Acer Pages: 33
Acer Predator 17 X GX-792 User Manual preview
Predator 17 X GX-792
Brand: Acer Pages: 94
Acer Predator Triton 500 SE User Manual preview
Predator Triton 500 SE
Brand: Acer Pages: 105
Acer Predator Helios 700 User Manual preview
Predator Helios 700
Brand: Acer Pages: 98
Acer Predator Helios 500 User Manual preview
Predator Helios 500
Brand: Acer Pages: 90
Acer PREDATOR 15 G9-591 User Manual preview
PREDATOR 15 G9-591
Brand: Acer Pages: 90
Acer R756T User Manual preview
R756T
Brand: Acer Pages: 16
Fujitsu Laptop User Manual preview
Laptop
Brand: Fujitsu Pages: 128
Fujitsu ESPRIMO Mobile V6505 Easy Manual preview
ESPRIMO Mobile V6505
Brand: Fujitsu Pages: 28
Winbook C Series User Manual preview
C Series
Brand: Winbook Pages: 58
Toshiba A600 S2201 - Portege - Core 2 Duo 1.2 GHz Brochure preview
A600 S2201 - Portege - Core 2 Duo 1.2 GHz
Brand: Toshiba Pages: 2
Toshiba A60-S166 Specifications preview
A60-S166
Brand: Toshiba Pages: 3
Toshiba A605 P200 - Portege - Core 2 Duo 1.4 GHz Specifications preview
A605 P200 - Portege - Core 2 Duo 1.4 GHz
Brand: Toshiba Pages: 4
Toshiba A600 S2201 - Portege - Core 2 Duo 1.2 GHz Specifications preview
A600 S2201 - Portege - Core 2 Duo 1.2 GHz
Brand: Toshiba Pages: 5

Brands by name

Popular brands

Load more brands