manualshive.com logo in svg

Toshiba Satellite M500, Maintenance Manual

Share
Download
Toshiba Satellite M500 Maintenance Manual Download Page 162

4  Replacement Procedures 

4.6  Wireless LAN card 

Removing the Wireless LAN card 

To remove the wireless LAN card, make sure the computer is in boot mode and powered 

off, follow the steps below and refer to Figures 4-9 to 4-10. 

NOTE:    The wireless LAN card is an option. 

CAUTION:  Do not try to remove the wireless LAN card with the computer turned 

on. The computer or the wireless LAN card can be damaged. Do not 

touch the connectors on the wireless LAN card module on the computer. 

Debris on the connectors may cause wireless LAN card access problems. 

1.

 

Loosen the 

screw

 (with an e-ring) and remove the Wireless LAN card

 cover.

 

 

Figure 4-9    Remove Wireless LAN card cover 

2.

 

Remove one piece of tape and the following 

screw

 then the 

wireless antennas

. 

M2

3L   FLAT 

HEAD 

screw 

  

2 

SatelliteM500/M500D Maintenance Manual

 [CONFIDENTIAL]                                                     

4-23 

Summary of Contents for Satellite M500



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands