Toshiba Satellite M45, Service Manual

Page: 16 / 94

2-7-3. Cylinder Ass’y Removal from Main Base
2-7-4. Head Brush Holder FPC Removal
Remove screws holding the main base and
the cylinder ass’y.
2) Lift the cylinder ass’y in the direction of arrow.
NOTE
not
touch the video heads
during removal or.
installation.
THREE
SCREWS
Remove screw and then lift the head brush
2) Release the holder FPC tab holding the cylinder base
in the direction of arrow. (Refer to detail drawing)
3) Disconnect the holder FPC from the cylinder base
NOTE When disconnecting the holder FPC @from the
cylinder base Take care not to disconnect the
FPC cable from the holder FPC FPC cable is
@ ONE SCREW
HEAD BRUSH
HOLDER FPC
CYLINDER BASE
HOLDER FPC TAB
Fig. 20 Cylinder Ass’y Removal from Main Base
J
<DETAIL : BOTTOM VIEW>
Fig. 21 Head Brush Holder FPC Removal
2-15