manualshive.com logo in svg

Toshiba Satellite L670, Maintenance Manual

Share
Download
Toshiba Satellite L670 Maintenance Manual Download Page 193

4.23 LCD Module 

4 Replacement Procedures 

Installing the LCD Panel 

Install the LCD panel according to the following procedures and Figure 4.45. 

1.

 

Connect the LVDS cable to the LCD panel connector, and adhere the clear tape to the 
back of the LCD panel. 

2.

 

Align the LCD hinges with the LCD panel and secure them with four M2x2.5 screws, 
according to the sequence indicated in Figure 4.45. 

22

22

11

11

 

M2×2.5*4 

Figure 

 

4.45 Installing the LCD hinges 

3.

 

Place the LCD module in the LCD cover assembly.  

4.

 

Secure the LCD panel to the LCD cover assembly with two M2.5x6 screws.  

5.

 

Connect the camera module cable to the camera module. 

Satellite L670/L675/Pro L670 Maintenance Manual     

 

[CONFIDENTIAL]

 

Summary of Contents for Satellite L670
































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands