manualshive.com logo in svg

Toshiba Satellite L670, Maintenance Manual

Share
Download
Toshiba Satellite L670 Maintenance Manual Download Page 152

4 Replacement Procedures 

4.4 Memory  

[CONFIDENTIAL]       Satellite L670/Pro L670 Maintenance Manual   

Installing the Optional Memory 

Install the optional memory according to the following procedures after checking that the laptop 
is turned off. 

CAUTION: Install the optional memory after turning off the laptop. If this is violated, the 
laptop or memory can be damaged. 

1.

 

Insert the memory into the connector at an angle of 45 degrees. 

2.

 

Press down on the memory module until it is secured in place by the two memory lock 
latches. 

Once the laptop is turned on, check the hardware configuration in the Hardware Setup or 
TESTUP program to make sure that the installed memory has been recognized by the system. If 
it has not been recognized yet, check the connections. 

Summary of Contents for Satellite L670
































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands