manualshive.com logo in svg

Toshiba Satellite L630 Series, User Manual

The Toshiba Satellite L630 Series is a versatile and cutting-edge laptop designed for seamless performance. Unlock the full potential of your device with the comprehensive User Manual, available for free download at manualshive.com, providing step-by-step instructions and valuable insights to enhance your user experience.

Share
Download
background image

17

5.375 x 8.375 ver 2.3

Europe - Restrictions for use of 2.4 GHz Frequencies in 
European Community Countries

Ukraine

United Kingdom

Uruguay

USA

Venezuela

Vietnam

Yemen

Zimbabwe

België/
Belgique:

For private usage outside buildings across public grounds over less than 
300m no special registration with IBPT/BIPT is required. Registration to 
IBPT/BIPT is required for private usage outside buildings across public 
grounds over more than 300m. For registration and license please 
contact IBPT/BIPT.

Voor privé-gebruik buiten gebouw over publieke groud over afstand 
kleiner dan 300m geen registratie bij BIPT/IBPT nodig; voor gebruik 
over afstand groter dan 300m is wel registratie bij BIPT/IBPT nodig. 
Voor registratie of licentie kunt u contact opnemen met BIPT.

Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, au-
dessus d’un espace public, aucun enregistrement n’est nécessaire pour 
une distance de moins de 300m. Pour une distance supérieure à 300m un 
enregistrement auprès de l’IBPT est requise. Pour les enregistrements et 
licences, veuillez contacter l’IBPT.

Deutschland:

License required for outdoor installations. Check with reseller for 
procedure to follow.

Anmeldung im Outdoor-Bereich notwendig, aber nicht 
genehmigungspflichtig. Bitte mit Händler die Vorgehensweise 
abstimmen.

France:

Restricted frequency band: only channels 1 to 7 (2400 MHz and 2454 
MHz respectively) may be used outdoors in France. Please contact 
A.R.T. (http://www.art-telecom.fr) for applicable procedures to follow.

Bande de fréquence restreinte: seuls les canaux 1- 7 (2400 et 2454 MHz 
respectivement) doivent être utilisés endroits extérieur en France. Vous 
pouvez contacter l’Autorité de Régulation des Télécommunications 
(http://www.art-telecom.fr) pour la procédure à suivre.

Italia:

License required for indoor use. Use with outdoor installations not 
allowed.

È necessaria la concessione ministeriale anche per l’uso interno.

Verificare con i rivenditori la procedura da seguire.

Nederland:

License required for outdoor installations. Check with reseller for 
procedure to follow.

Licentie verplicht voor gebruik met buitenantennes. Neem contact op 
met verkoper voor juiste procedure.

Summary of Contents for Satellite L630 Series







































































































































































































































Reviews:

No comments

Related manuals for Satellite L630 Series

Redfox Razor series User Manual preview
Razor series
Brand: Redfox Pages: 21
Panasonic Toughbook CF-48P4FAUEM User Manual preview
Toughbook CF-48P4FAUEM
Brand: Panasonic Pages: 36
Panasonic Toughbook CF-28PMJAZQM User Manual preview
Toughbook CF-28PMJAZQM
Brand: Panasonic Pages: 36
Panasonic Toughbook CF-73XCVTSBM Operating Instructions Manual preview
Toughbook CF-73XCVTSBM
Brand: Panasonic Pages: 44
Panasonic Toughbook CF-74JCJBDxM Service Manual preview
Toughbook CF-74JCJBDxM
Brand: Panasonic Pages: 69
Panasonic Toughbook CF-52EKMxDxM Service Manual preview
Toughbook CF-52EKMxDxM
Brand: Panasonic Pages: 88
Dell G5 SE 5505 Service Manual preview
G5 SE 5505
Brand: Dell Pages: 65
Dell G15 5511 Setup And Specifications preview
G15 5511
Brand: Dell Pages: 23
Dell E Series Service Manual preview
E Series
Brand: Dell Pages: 25
Dell G15 5510 Setup And Specifications preview
G15 5510
Brand: Dell Pages: 21
Dell G15 5521 Special Edition Setup And Specifications preview
G15 5521 Special Edition
Brand: Dell Pages: 23
Dell G3 3590 Setup And Specifications preview
G3 3590
Brand: Dell Pages: 24
Dell G16 762 Setup And Specifications preview
G16 762
Brand: Dell Pages: 23
Dell G3 17 Setup And Specifications preview
G3 17
Brand: Dell Pages: 21
Dell G5 5590 Setup And Specifications preview
G5 5590
Brand: Dell Pages: 23
Dell G7 15 Setup And Specifications preview
G7 15
Brand: Dell Pages: 25
Dell G16 7620 Service Manual preview
G16 7620
Brand: Dell Pages: 79
Dell G7 15 7500 Service Manual preview
G7 15 7500
Brand: Dell Pages: 88

Brands by name

Popular brands

Load more brands