Toshiba Satellite L300D Maintenance Manual Download Page 75

Page: 75 / 244

3 Diagnostic Programs

3.2 Quick Start

In this screen, All lines which attribute could be edited and updated. The 1

line (the font

in yellow with blue background) shows the attribute’s value that is read from the current
system and the 2

line (the font in red with turquoise background) shows the same value

as that in the 1

line before user’s editing. User can modify the attribute’s value in the 2

line and press

Enter

to confirm the current edition and continue editing the next attribute.

During the editing, user could press

to confirm the DMI attribute update or press

to ignore the modification. Press

ESC

to exit the program of DMI Write.

The confirmation screen is as below:

NOTE:

The length OEM Part Number and OEM SW Number is max 16 Digital; others are

Max 32 Digital.

Downloaded from LpManual.com Manuals

Summary of Contents for Satellite L300D





















































































































































































































































Search results

Summary of Contents for Satellite L300D

Reviews:

Related manuals for Satellite L300D

Brands by name

Popular brands

Toshiba Satellite L300D, Maintenance Manual

Search results

Summary of Contents for Satellite L300D

Reviews:

Related manuals for Satellite L300D

Brands by name

Popular brands