Toshiba Satellite C660 User Manual Download Page 82

Page: 82 / 153

User’s Manual

4-16

Operating Basics

■

Do not change the screen resolution while running the "TOSHIBA

VIDEO PLAYER".

Starting TOSHIBA VIDEO PLAYER

Use one of the following procedures to start "TOSHIBA VIDEO PLAYER".
1. Insert a DVD-Video in the DVD Super Multi drive while Windows 7 is

running. When a DVD-Video disc is set in the DVD drive, the following

application selection screen may appear.

When a DVD-Video disc is set in the DVD drive (for models with DVD

Super Multi drive), the following application selection screen may appear.
If this occurs, select

Play DVD

movie (using TOSHIBA VIDEO PLAYER)

to launch the

TOSHIBA VIDEO PLAYER

2. Touch the

CD/DVD Play/Pause

panel on the Front operation panel. Or

select

Start

All Programs

TOSHIBA VIDEO PLAYER

to start "TOSHIBA VIDEO PLAYER".

Operating TOSHIBA VIDEO PLAYER

Notes on Using "TOSHIBA VIDEO PLAYER".

■

Screen display and available features may vary amongst DVD-Videos

and scenes.

■

If the menu is opened in the Display Area using the Control window's

Top Menu or Menu buttons, touch pad and mouse menu operations

may not be able to be used.

Open TOSHIBA VIDEO PLAYER HELP

TOSHIBA VIDEO PLAYER features and instructions are also explained in

detail in "TOSHIBA VIDEO PLAYER Help".
Use the following procedure to open "TOSHIBA VIDEO PLAYER Help".

■

Click the "Help" button (

) in the Display Area.

Summary of Contents for Satellite C660


























































































































































Search results

Summary of Contents for Satellite C660

Reviews:

Related manuals for Satellite C660

Brands by name

Popular brands

Toshiba Satellite C660, User Manual

Search results

Summary of Contents for Satellite C660

Reviews:

Related manuals for Satellite C660

Brands by name

Popular brands