Toshiba Satellite C660 User Manual Download Page 37

Page: 37 / 153

User’s Manual

2-5

The Grand Tour

Battery pack

The battery pack provides power to the computer

when the AC adaptor is not connected. For more

detailed information on the use and operation of

the battery pack please refer to Chapter 6,

Power

and Power-Up Modes

Battery release latch

Slide and hold this latch into its "Unlock" position

in order to release the battery pack for removal.

For more detailed information on removing the

battery pack please refer to Chapter 6,

Power

and Power-Up Modes

Memory module slot

The memory module slot allows for the

installation, replacement and removal of

additional memory module.
Refer to the

Additional memory module

section

in Chapter 3,

Hardware, Utilities and Options

Summary of Contents for Satellite C660


























































































































































Search results

Summary of Contents for Satellite C660

Reviews:

Related manuals for Satellite C660

Brands by name

Popular brands

Toshiba Satellite C660, User Manual

Search results

Summary of Contents for Satellite C660

Reviews:

Related manuals for Satellite C660

Brands by name

Popular brands