1-9-1
E3TK0HSC
HOW TO SELF-CHECK AND HDD FORMAT
1. Turn on the HDD & DVD/VCR.
2. To put the HDD & DVD/VCR into the HDD mode, press [HDD] on the remote control unit.
3. To put the HDD & DVD/VCR into the self-check mode, after pressing [VARIABLE SKIP] button, press the [0],
[7], and [9] buttons on the remote control in that order within three seconds.
Fig. a appears on the screen and all LEDs light.
Fig. a Self-Check Mode Screen
4. Upon the self-check completion, Fig. b appears on the screen.
Fig. b Screen of Finishing Self-Check Mode
Table 1: Description of Fig. a
INDICATION
DESCRIPTION
DVD CONNECT STATUS (*1)
Connecting Condition of DVD(F/E)
HDD CONNECT STATUS (*2)
Connecting Condition of HDD
HDD POWER ON HOURS (*3)
Value of HDD power on hours obtained from S.M.A.R.T. command. (If not obtainable,
value of HDD power on hours is “0”.)
Value in parentheses is the factory setting value. (If no setting, the value is “0”.)
SELF CHECK
DVD CONNECT STATUS :
HDD CONNECT STATUS :
HDD POWER ON HOURS :
HDD FORMAT START :
POWER OFF :
ENTER
POWER
*1
*2
*3
SELF CHECK
DVD CONNECT STATUS : OK
HDD CONNECT STATUS : OK
HDD POWER ON HOURS : 70
*4
*5
*6
*7
HDD FORMAT START :
POWER OFF :
ENTER
POWER
