1-10-2
E3B90FW
The status displayed in *2 is as shown below.
Fig. e: VFD Display during update
When the TV screen displays "Firmware
Updating... XX% Complete," the VFD will indicate
"XX"%.
7. When update is complete, the unit will shut off
automatically.
8. If an error occured during updating, the TV screen
will display Fig. f.
Fig. f: TV Display when completing update with error
Fig. h: VFD Display when completing update with error
In this case, all button operations will be invalid
except [
] button.
9. Press [
] button to turn the power off and press
[
] button again to turn the power back on and
finish updating.
3. How to Verify the Firmware
Version
1. Turn the power on and remove the disc in the tray.
2. To switch the HDD & DVD into HDD mode, press
[HDD] on the remote control unit.
3. To put the HDD & DVD into version display mode,
press [VARIABLE SKIP] and [1], [2], [3] buttons on
the remote control unit in that order within 3
seconds. Fig. i appears on the TV screen.
Fig. i: Firmware version display
Effective buttons in this mode are the following...
Display
Status
EXECUTING
Loading F/W from Update Disc or
writing to Flash memory
ERROR
Error during Flash memory writing
FILE ERROR
Check SAM error in F/W file
READ ERROR
Error during F/W file reading
DISC UPDATE
PLEASE PUSH POWER BUTTON
TARGET: B/E
STATUS: ERROR
*FIRMWARE version will differ depending on the
model. Fig. f is an example.
Display
Contents
MODEL NAME
Product number
BE Ver.
Firmware B/E version
FE Ver.
Application F/E version
Sub Micon Ver.
Sub Microcontroller firmware
version
REGION
Region code of playable DVD disc
CPRM KEY NO.
CPRM key number
HDD MODEL
HDD serial number and capacity
(GByte)
DivX Ver.
Version number of DivX filesystems
LD
ADJUSTMENT
LD adjustment progress (done: OK/
not done: --)
DISC
ADJUSTMENT
Factory adjustment progress (done:
OK/not done: --)
Buttons
Operations
POWER
Power off to release from this
mode.
SETUP
Version display disappears and
SETUP screen appears.
TOP MENU
Version display disappears and
TOP MENU screen appears.
TIMER PROG.
Version display disappears and
TIMER PROGRAMMING screen
appears.
DUBBING
MENU
Version display disappears and
DUBBING screen appears.
Others
While displaying version and
normal operation.
******* part will differ depending on the model.
Fig. i is an example.
VERSION INFORMATION
E3B90ED
T3*****B2S-****
R35_***_***
T3***TTP
2
(0x***)
***********(***GByte)
***
OK
OK
Model Name :
BE Ver. :
FE Ver :
Sub Micon Ver. :
REGION:
CPRM KEY NO:
HDD MODEL:
DivX Ver.:
LD ADJUSTMENT:
DISC ADJUSTMENT:
