Toshiba RBC-MTSC2 Installation Manual Download Page 3

Page: 3 / 24

RBC-MTSC2 Mini Touch Screen Controller

Installation & Owner Manual

Warning Indications on the Air Conditioner Unit

Warning indication

Description

WARNING

ELECTRICAL SHOCK HAZARD

Disconnect all remote electric power supplies before servicing.

WARNING

ELECTRICAL SHOCK HAZARD

Disconnect all remote
electric power supplies
before servicing.

WARNING

Moving parts.

Do not operate unit with grille removed.
Stop the unit before the servicing.

WARNING

Moving parts.
Do not operate unit with grille
removed. Stop the unit before the
servicing.

CAUTION

High temperature parts.
You might get burned when removing this panel.

CAUTION

High temperature parts. You
might get burned when removing
this panel.

CAUTION

Do not touch the aluminium fins of the unit.
Doing so may result in injury.

CAUTION

Do not touch the aluminium fins
of the unit.
Doing so may result in injury.

CAUTION

BURST HAZARD

Open the service valves before the operation, otherwise there
might be the burst.

CAUTION

BURST HAZARD

Open the service valves before
the operation, otherwise there
might be the burst.

Summary of Contents for RBC-MTSC2

























Search results

Summary of Contents for RBC-MTSC2

Reviews:

Related manuals for RBC-MTSC2

Brands by name

Popular brands

Toshiba RBC-MTSC2, Installation Manual

Search results

Summary of Contents for RBC-MTSC2

Reviews:

Related manuals for RBC-MTSC2

Brands by name

Popular brands