background image

Wireless Remote Controller Kit

Owner’s Manual

– 7 –

3

HOW TO OPERATE INDOOR UNIT

„

Auto, Heat, Dry, Cool, Fan

• The automatic cooling/heating and 

heating functions are not provided for 
cool-only types.

• The automatic cooling/heating is not 

available for heat pump types that are not 
provided with the automatic cooling/
heating function.

Power

Turn on the power switch on the remote 
controller 12 hours before starting operation.

* The remote controller is disabled for approx. 

1 minute after the indoor unit has been 
powered on. This is normal. (The signal from 
the remote controller is received, but the 
receive data is discarded.)

1

Push .

2

Push 

 to select an operation mode.

• Select Auto, Heat, Dry, Cool, or Fan.

3

Push 

 to select a fan speed.

• When the Auto mode is selected, the fan 

speed changes automatically. The fan 
speed does not change automatically in 
the Fan mode.

4

Push either button of   to select the 
desired temperature.

• Temperature setting is not available for the 

Fan mode.

5

Stop

Push .
When the operation is stopped with the 
remote controller, the outdoor unit fan keeps 
running in some cases even after the 
compressor of the outdoor unit has stopped.

If the room is not well heated with FAN  

 during heating, change the fan 

speed to FAN 

 or FAN 

.

Although selected fan speed is displayed, 
some indoor unit types are not provided 
with the air volume change function. (Fan 
speed is constant.)

If the unit operation cannot be stopped 
in the usual manner, turn off the power 
switch and contact the dealer from 
whom you purchased the air 
conditioner.

 

„

Automatic Cooling/Heating

When all indoor units in the same refrigerant 
system are under the group control, heating 
or cooling operation is automatically 
performed according to the difference 
between the setup temperature and the 
room temperature.

„

Self cleaning

The self cleaning operation starts 
automatically after running the cooling/dry 
mode (10 minutes or more) to keep the 
inside of the indoor unit clean. 
(For details, refer to the Owner’s Manual of 
the indoor unit.)
To stop self cleaning forcibly, push 

 twice 

quickly.

1

2
3

4

7-EN

EH78981901_01EN_remo_OM.book  Page 7  Saturday, November 10, 2007  4:26 PM

Summary of Contents for RBC-AX31U-E
















Reviews: