Toshiba RBC-ASC11E, Owner'S Manual

Page: 7 / 172

EN
DK
NL
LV
FR
NO
GR
HR
DE
PL
RU
CZ
IT
BG
TR
SK
ES
RO
SE
SL
PT
ET
FI
HU
-5-
1
ON/OFF button
Press the button to light up the running
indicator, and start running.
During heating
·
In the case where the indoor unit fan
mode is off, the air conditioner starts
to send out hot air after preheating for
3-5 minutes.
2 Select running mode
Switch to the running mode by pressing
the menu button.
·
The current running mode icon
flickers.
Press the set button each time, then the
running mode and its icons change in
the following order:
(Cooling only mode will not display:
“ Auto” and “ Heat”)
·
For the multi-connection system,
“ Auto” can only be displayed and
selected on the super heat recovery
multi-connection system.
·
“ Dehumidify” is not available for
concealed duct high static press type.
·
If the button is not operated within 30
seconds, the running mode selection
will end.
3
Select the fan speed
Switch to the fan speed mode by
pressing the menu button.
·
The current fan speed icon flickers.
Press the set button each time, then the fan
speed mode and its indication change in the
following order:
·
Three-speed models:
·
Five-speed models:
·
The fan speed that can be set will vary
depending on the connected indoor units.
·
In the fan mode, “ Auto” cannot be
selected.
·
These models that cannot set the fan
speed will display “
”.
·
If the button is not operated within 30
seconds, the fan speed selection will end.
4
Select the wind direction
Switch to the wind direction mode by
pressing the menu button.
·
The current wind direction icon flickers.
Press the set button each time, then the
wind direction mode and its icons change in
the following order:
Operating Modes Available wind direction
Heat, Fan,
Auto (heating)
(1) ⇔ (2) ⇔ (3) ⇔ (4) ⇔ (5)
Cool, Dry,
Auto (cooling)
(1) ⇔ (2) ⇔ (3)
·
Due to the slight difference in different
model of indoor units, please refer to the Air
Conditioner Owner's Manual for details on
setting the louver position and swing.
·
If the button is not operated within 30
seconds, the wind direction selection will end.
5
Temperature selection
Press the set button to adjust the temperature.
·
Temperature setting range is from 18.0°C
to 29.0°C
·
The sensitivity of temperature adjustment
is 0.5°C.
■
Run operation