Toshiba RAV-HM1101UT-E Owner'S Manual Download Page 4

– 3 –

1

Precautions for safety

The manufacturer shall not assume any liability for the damage caused 
by not observing the description of this manual.

General

• Carefully read Owner’s Manual before starting the air conditioner. 

There are many important things to keep in mind for daily operation.

• Ask for installation to be performed by the dealer or a professional. 

Only a Qualified installer (*1) is able to install an air conditioner. If a 

non-qualified person installs an air conditioner, it may result in 

problems such as fire, electric shock, injury, water leakage, noise and 

vibration. 

• Do not use any refrigerant different from the one specified for 

complement or replacement. Otherwise, abnormally high pressure 

may be generated in the refrigeration cycle, which may result in a 

failure or explosion of the product or an injury to your body.

• Do not install the air conditioner in a place where the operation sound 

of the outdoor unit may cause a disturbance. (Especially at the 

boundary line with a neighbor, install the air conditioner while 

considering the noise.)

• This appliance is intended to be used by expert or trained users in 

shops, in light industry, or for commercial use by lay persons.

Transportation and storage

• To transport the air conditioner, wear shoes with protective toe caps, 

protective gloves, and other protective clothing.

• To transport the air conditioner, do not take hold of the bands around 

the packing carton. You may injure yourself if the bands should break.

• Before stacking the packing cartons for storage or transportation, 

heed the precautions written on the packing cartons. Failure to heed 

the precautions may cause the stack to collapse.

• The air conditioner must be transported in stable condition. If any part 

of the product broken, contact your dealer.

•  When the air conditioner must be transported by hand, carry it by two 

or more people.

WARNING

Installation

• Only a Qualified installer (*1) or Qualified service person (*1) is 

allowed to carry out the electrical work of the air conditioner. Under 

no circumstances must this work be done by an unqualified individual 

since failure to carry out the work properly may result in electric 

shocks and/or electrical leaks.

• After the installation work has been completed, have the installer 

explain about the circuit breaker positions. In the event that trouble 

has occurred in the air conditioner, set the circuit breaker to the OFF 

position, and contact a service person.

• If the unit is installed in a small room, take appropriate measures to 

prevent the refrigerant from exceeding the limit concentration even if 

it leaks. Consult the dealer from whom you purchased the air 

conditioner when you implement the measures. Accumulation of 

highly concentrated refrigerant may cause an oxygen deficiency 

accident.

• Do not install the air conditioner in a location that may be subject to a 

risk of expire to a combustible gas. If a combustible gas leaks and 

becomes concentrated around the unit, a fire may occur.

• Use the company-specified products for the separately purchased 

parts. Use of non-specified products may result in fire, electric shock, 

water leakage or other trouble. Have the installation performed by a 

professional.

• Confirm that earthing is performed correctly. 

Operation

• Before opening the intake grille of the indoor unit or service panel of 

the outdoor unit, set the circuit breaker to the OFF position. Failure to 

set the circuit breaker to the OFF position may result in electric 

shocks through contact with the interior parts. Only a Qualified 

installer (*1) or Qualified service person (*1) is allowed to remove the 

intake grille of the indoor unit or service panel of the outdoor unit and 

do the work required.

• Inside the air conditioner are high-voltage areas and rotating parts. 

Due to the danger of electric shocks or of your fingers or physical 

objects becoming trapped in the rotating parts, do not remove service 

panel of the outdoor unit. When work involving the removal of these 

parts is required, contact a Qualified installer (*1) or a Qualified 

service person (*1).

• Do not move or repair any unit by yourself. Since there is high voltage 

inside the unit, you may get electric shock when removing the cover 

and main unit.

5-EN

6-EN

Summary of Contents for RAV-HM1101UT-E

















Reviews: