Toshiba RAV-GM901BTP-E, Installation Manual

Page: 9 / 30

– 8 –
y
In the above cases, additionally attach the heat insulator to all positions of the air conditioner, which come to
contact with the high-humidity atmosphere. In this case, arrange the side plate (Check port) so that it is easily
removed.
y Apply also a suf fi cient heat insulation to the duct and connecting part of the duct.
[Reference] Condensation test conditions
Indoor side:
27°C dry bulb temperature
24°C wet bulb temperature
Air volume: Low air volume, operation time 4 hours
„
Installation space
(Unit: mm)
Reserve suf fi cient space required for installation or service work.
25
A
25
12
0
B
25
570
570
25
570
25
Ceiling
Ceiling
Ceiling
Ceiling
Air intake
Air intake
Air intake
50 or more
300 or more
100
or more
2500
or more
Floor surface
Service door (Ceiling opening)
Service door (Ceiling opening)
Service door (Ceiling opening)
Service door (Ceiling opening)
Service space
(B for maintenance of air fi lter)
B
or more
5 or more
70 or more
100 or more
275
Air discharge
Air discharge
Check port
450
Model A B
GM90 1450 700
„ Filter cleaning sign term setting
The lighting term setup of the fi lter sign (Noti fi cation of fi lter cleaning) of the remote controller can be changed
according to the condition of installation.
For setup method, refer to “Filter sign setting” in the Applicable controls of this Manual.
CAUTION
Strictly comply with the following rules to prevent damage of the indoor units and human injury.
y Do not put a heavy article on the indoor unit or let a person get on it. (Even units are packaged)
y Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit unpacked by necessity, use
buffering cloth or other material to not damage the unit.
y To move the indoor unit, hold the hooking brackets (4 positions) only.
Do not apply force to the other parts (such as refrigerant pipe, drain pan, foamed parts, or resin parts).
y Carry the package by two or more persons, and do not bundle it with plastic band at positions other than
speci
fi ed.
y To install vibration isolation material to hanging bolts, con fi rm that it does not increase the unit vibration.
„ External dimensions
(Unit: mm)
1800
275
750
0 5 0 5
355
345
236
22
25
C
L
570
43
187.5
131
415
113.5
D
Hanging bolt pitch B
Hanging bolt pitch 650
Drain pan / Drain
pump check cover Electrical
control box
345 or more
70 or more
Main unit dimension A
External dimensions of fl ange C
4
Dimension
Model A B C D
GM90 1400 1465 1340 1450
4
Installation
16-EN 15-EN