background image

• The air conditioner must be transported in stable condition.

If any part of the product broken, contact your dealer.

• When the air conditioner must be transported by hand, carry it 

by two or more people.

Installation

• Only a quali

fi

ed installer(*1) or quali

fi

ed service person(*1) is 

allowed to carry out the electrical work of the air conditioner.
Under no circumstances must this work be done by an 
unquali

fi

ed individual since failure to carry out the work properly 

may result in electric shocks and / or electrical leaks.

• After the installation work has been completed, have the 

installer explain about the circuit breaker positions. In the event 
that trouble has occurred in the air conditioner, set the circuit 
breaker to the OFF position, and contact a service person.

• If the unit is installed in a small room, take appropriate 

measures to prevent the refrigerant from exceeding the limit 
concentration even if it leaks. Consult the dealer from whom 
you purchased the air conditioner when you implement the 
measures. Accumulation of highly concentrated refrigerant may 
cause an oxygen de

fi

ciency accident.

• Do not install the air conditioner in a location that may be 

subject to a risk of expire to a combustible gas. If a combustible 
gas leaks and becomes concentrated around the unit, a 

fi

re may 

occur.

• Use the company-speci

fi

ed products for the separately 

purchased parts. Use of non-speci

fi

ed products may result in 

fi

re, electric shock, water leakage or other trouble. Have the 

installation performed by a professional.

• Con

fi

rm that earthing is performed correctly.

Operation

• Before opening the electrical control box cover of the indoor unit 

or service panel of the outdoor unit, set the circuit breaker to 
the OFF position. Failure to set the circuit breaker to the OFF 
position may result in electric shocks through contact with the 
interior parts. Only a quali

fi

ed installer(*1) or quali

fi

ed service 

person(*1) is allowed to remove the electrical control box cover 
of the indoor unit or service panel of the outdoor unit and do the 
work required.

• Inside the air conditioner are high-voltage areas and rotating 

parts. Due to the danger of electric shocks or of your 

fi

ngers or 

physical objects becoming trapped in the rotating parts, do not 
remove service panel of the outdoor unit. When work involving 
the removal of these parts is required, contact a quali

fi

ed 

installer(*1) or a quali

fi

ed service person(*1).

• Do not move or repair any unit by yourself. Since there is 

high voltage inside the unit, you may get electric shock when 
removing the cover and main unit.

• Use of a stand more than 50 cm high to clean the 

fi

lter of the 

indoor unit or to carry out other such jobs constitutes working at 
heights. Due to the danger of falling off the stand and injuring 
yourself while working at heights, this kind of work should not be 
done by unquali

fi

ed individuals. When this kind of work must be 

carried out, do not do it yourself but ask a quali

fi

ed installer(*1) 

or a quali

fi

ed service person(*1) to do it for you.

• Do not touch the aluminum 

fi

n of the outdoor unit. You may 

injure yourself if you do so. If the 

fi

n must be touched, do not 

touch it yourself but contact a quali

fi

ed installer(*1) or a quali

fi

ed 

service person(*1).

• Do not climb onto or place objects on top of the outdoor unit. 

You may fall or the objects may fall off of the outdoor unit and 
result in injury.

• Do not place any combustion appliance in a place where it is 

directly exposed to the wind of air conditioner, otherwise it may 
cause imperfect combustion.

– 4 –

8-EN

7-EN

OM_1116950248_EN.indd   4

OM_1116950248_EN.indd   4

22/6/2564 BE   16:14

22/6/2564 BE   16:14

Summary of Contents for RAV-GM1101BTP-A



















Reviews: