6
EN
Batteries
• To replace the batteries, use two new batteries (AAA type).
• The batteries will last about one year under normal usage.
• Replace the batteries if there is no receiving beep from the indoor unit or when the air conditioner cannot be operated using the
remote control.
• To avoid malfunctions due to battery leakage, remove the batteries when not using the remote control for more than one month.
• Slide off the cover while pressing the sides.
• Battery replacement
Be careful not to reverse the (+) position and the (–) position.
Setting the clock
Before you start operating the air conditioner, set the clock of the remote control using
the procedures given in this section. The clock panel on the remote control will indicate
the time regardless of whether the air conditioner is in use or not.
Initial setting
When batteries are inserted in the remote control, the clock panel displays AM 0:00 and
flashes.
a
ON
button
Press the ON
button to set the current time.
Each press of the ON button changes the time in one minute increments.
Holding down the ON button changes the time in ten minute increments.
b
SET
button
Press the SET
button.
The current time is displayed and the clock starts.
Adjusting the clock
a
CLOCK button
Press the CLOCK button.
The clock time indicator flashes.
b
ON
button
Press the ON
button to set the current time.
Each press of the ON button changes the time in
one minute increments.
Holding down the ON button changes the time in ten
minute increments.
c
SET
button
Press the SET
button.
The current time is displayed and the clock starts.
AUTO
PRESET
CLOCK
CHECK
RESET
CLR
SET
SWING
FIX
FAN
ON
OFF
a
b
PURE
MODE
HiPOWER
ECO
MEMO
SLEEP
TEMP
1.3.5.9H
ON
ON
SET
SET
CLOCK
CHECK
RESET
CLR
SET
SWING
FIX
FAN
ON
OFF
HiPOWER
ECO
MEMO
SLEEP
1.3.5.9H
AUTO
PRESET
CLOCK
CHECK
RESET
CLR
SET
SWING
FIX
FAN
ON
OFF
a
b
c
PURE
MODE
HiPOWER
ECO
MEMO
SLEEP
TEMP
1.3.5.9H
Push CLOCK
ON
ON
SET
SET
