Toshiba RAS-10J2AVSG-TR1, Owner'S Manual

Page: 4 / 40

INDOOR UNIT DISPLAY
1
AIR FLOW DIRECTION
3
AUTOMATIC OPERATION
6
To automatically select cooling, heating, or fan only operation
1. Press
MODE MOD
: Select Auto A.
2. Press : Set the desired temperature. Min. 17°C, Max. 30°C.
3. Press
FAN FAN
: Select AUTO, LOW , LOW+ , MED ,
MED+ , HIGH or Quiet
1. Press
MODE MOD
: Select Cool , or Fan only .
2. Press : Set the desired temperature. Min. 17°C, Max. 30°C.
Fan Only: No temperature indication
3. Press
FAN FAN
: Select AUTO, LOW , LOW+ , MED ,
MED+ , HIGH or Quiet
DRY OPERATION
8
For dehumidi fi cation, a moderate cooling performance is controlled
automatically.
1. Press
MODE MOD
: Select Dry .
2. Press : Set the desired temperature. Min. 17°C, Max. 30°C.
Note: DRY mode fan speed is set to Auto only.
HEATING and 8°C OPERATION 7
1. Press
MODE MOD
: Select Heat .
2. Press : Set the desired temperature. Min = 5°C, Max = 30°C.
* Temperature range 5-16°C is Heat mode with 8°C operation with less of
energy usage
3. Press
FAN FAN
: Select AUTO, LOW , LOW+ , MED ,
MED+ , HIGH or Quiet
Note: During 8°C mode active (temperature range 5-16°C), some operation
such as QUIET, Hi POWER, TIMER OFF cannot use.
1
Press
FIX FIX
: Move the
louver in the desired vertical
direction.
2
Press
FIX FIX
: Move the
louver in the desired horizontal
direction.
3
V
V
H
H
H.DA
Swing off
Vertical
(Up-Down)
Swing
Vertical and
Horizontal
Swing
Horizontal
(Left-Right)
Swing
HADA CARE
FLOW
SWING operation can be
selected from MENU button
MENU MEN
●
Vertical (Up-Down) swing
●
Horizontal (Left-Right) swing
●
HADA Care fl ow
Note:
● Do not move the louver manually by hands or others.
● The louver may automation positioning by some operation mode.
● Display brightness can be adjusted, follow procedure on " .
1 ECO (White)
2 Wi-Fi access (White)
3
PURE (White)
4 Timer (White)
5 Operation Mode
- Cool (Blue)
- Heat (Orange)
Preparing Filters
1. Open the air inlet grille and remove the air fi lters.
2. Attach the fi lters. (see detail in the Installation Manual).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Remote Control Reset
1. Remove the batteries.
2. Press .
3. Insert the batteries.
PREPARATION BEFORE USE
2
REMOTE CONTROL
4
1
Infrared signal emitter
2
Start/Stop button
3 Mode select button
4
Temperature button
5
Fan speed button
6
Menu select button
7
Set louver Up-Down button
8
Set louver Left-Right button
9
Check button*
*Check button under battery cover
FIX
MODE
FAN MENU
FIX FIX FIX
FAN MEN
MOD
2
1
4
6
8
3
5
7
9
COOLING / FAN ONLY OPERATION
5
OM_1129850202_EN-TR.indb 4 OM_1129850202_EN-TR.indb 4 20/1/2564 BE 11:12 20/1/2564 BE 11:12