manualshive.com logo in svg

Toshiba Qosmio G50 Series, Maintenance Manual, Page: 171 / 446

Share
Download
Toshiba Qosmio G50 Series Maintenance Manual Download Page 171

3.20 ONLY ONE TEST 

3 Tests and Diagnostics  

Subtest 06 

Button

 

 

This subtest checks if the touch sensor buttons (11 buttons) work properly. 

 

The following message appears in the display. 

 

 

 

 

0 1 2 3 4 5 6 7 8 
                  
* * * * * * * * * 

Press Function button !

 

 

Touch the first touch sensor button from the left. The name of touch sensor 
button in the message is described as number (0-8) from the left side. (Refer to 
the following picture.) 

 

 

 

Touch sensor buttons

 

 

8

 7 

6 

2

5

4

3

 1 

0 

 

Press the indicated touch sensor button [0], then following message will appear 
in the display. 

 

 

 

Press Function button [1] 

 

As the same way, press the indicated touch sensor button and carry on the 
touch sensor button test. 

 

If wrong key is pressed, following message will appear in the display. 

 

 

 

Press any key ! 

 

Pressing any key, indication of pressing touch sensor button will appear in the 
display again. Unless the right touch sensor button is pressed, this operation is 
repeated. 

 

After checking all touch sensor button, return to the ONLY ONE TEST menu 
automatically. 

 

 

QOSMIO G20 Maintenance Manual (960-511) CONFIDENTIAL] 

3-45 

Summary of Contents for Qosmio G50 Series































































































































































































































































































































































































































































Reviews:

No comments