Do not use a battery whose "recommended expiration date" has been
reached, or which is completely discharged.
Do not use different types of batteries or old and new batteries at the
same time.
Do not carry the battery together with metal necklaces, hairpins or
other metal accessories.
When storing or disposing of used batteries, make sure to put some
insulation tape on their terminals (+ and -) to avoid short-circuits.
If these precautions are not followed, heating, fluid leakage or explosion
may occur. This may cause burns or personal injury. If battery fluid gets on
your skin or clothes, wash immediately with clean water. If battery fluid gets
in your eyes, rinse your eyes with clean water immediately and see a
doctor. Do not touch the battery fluid on instruments or devices with bare
hands. Wipe off with a cloth or paper towel.
When the battery shipped with the Remote Controller is discharged,
replace it with commercially available AA manganese batteries for the full
size remote controller, or CR2025 battery for the slim remote controller.
Other types of battery should not be used.
Installing batteries for full size remote controller:
1.
Slide the battery cover on the back side of the remote controller in the
direction of the arrow to remove the cover.
Figure 4-4 Opening the battery cover
1. Battery cover
2.
Insert the new batteries in place. Be sure to place the batteries with
correct polarities.
Figure 4-5 Inserting the batteries
1. Batteries
User's Manual
4-11