Toshiba Portege R30-A Series User Manual Download

Page: 154 / 201

154

If Something Goes Wrong

Disk or storage drive problems

Right-click or touch the drive you wish to check.

(Sample Image) Clicking on or touching the drive

In the pop-up menu, click or touch

Properties

The drive’s Properties box appears.

Click or touch the

Tools

tab.

Click or touch the

Check

button.

The Error Checking box appears.

The system will alert you if you need to scan the drive.

Even if you do not need to scan the drive for errors you
can scan by clicking or touching

Scan drive

Error-checking tests and repairs the storage drive.

Your hard disk seems very slow.

If you have been using your computer for a long time, your
files may have become fragmented. Run Disk Defragmenter.

To do this:

Move your pointer to the upper-right corner of the screen
or swipe in from the right edge. When the Windows

charms appear click or touch the

(

) charm,

then type

Defragment

in the Search field.

Click or touch

Defragment and Optimize Drives

From the Optimize Drives menu click or touch the drive
you wish to defragment.

Summary of Contents for Portege R30-A Series










































































































































































































Search results

Summary of Contents for Portege R30-A Series

Reviews:

Related manuals for Portege R30-A Series

Brands by name

Popular brands

Toshiba Portege R30-A Series, User Manual

Search results

Summary of Contents for Portege R30-A Series

Reviews:

Related manuals for Portege R30-A Series

Brands by name

Popular brands